Subscribe to RSS Feed

Dartblaster Modification

Dartblaster Modification

Under this category we have modification springs, modification kit and voltage-mods for all sorts of NERF-Guns by Hasbro and a few other blasters. Our springs are much stronger than the original parts and are carefully selected to get the most out of your blaster without stressing the material too much. A short manual (German) is included. But installation of a spring usually works the same way: Unscrew and open the blaster. Remove plunger, bolt-sled and catch. Exchange springs , reassemble, enjoy.

Some blasters need the replacement of other parts to withstand the forces a stronger spring applies on them. The „Recon“ and „Raider“ are prone to plunger failure, so we provide a stronger plunger. It is necessary for our „Hard Range“-spring, which can achieve ranges of around 20m. Mod kits also include an O-Ring for a tighter fit of the plunger and a stronger catch spring. The Elite Blasters „Retaliator“, „Rampage“ and „Alpha Trooper CS-12“ can jam because of a stronger spring. Our own „Guiding Shell“ prevents this and together with the also included catch spring it ensures reliable functioning of the blaster.

There are two kinds of electrical blasters. Some are plunger blasters that are cocked by a motor. Others use so-called flywheels – the dart gets pushed between two spinning wheels. To enhance electrical blasters the current needs to be increased. Our Voltage-Mod-Sets contain rechargeable Li-Ion batteries according to the blaster model, plus other things such as mod springs, catch springs, dummy batteries or adapters, depending on the blaster. Voltage-sets also contain an installation manual (German).

If your blaster is not listed here, contact us – We can surely help you. Have fun tweaking!

Items 1 to 36 of 115 total

per page

Page:
  1. 1
  2. 2
  3. 3
  4. 4

Items 1 to 36 of 115 total

per page

Page:
  1. 1
  2. 2
  3. 3
  4. 4