Modification spring for NERF Longshot CS-6

No other blaster becomes as formidable as the Nerf N-Strike Longshot due to a simple spring replacement!
Modification spring for NERF Longshot CS-6 is available for purchase in increments of 1

Ready for despatch (in days): 1

Availability: Deliverable

€8.90
Incl. 19% Tax, excl. Shipping Cost
Blasterparts

Details

Details

Combined with a Modification Spring the Nerf N-Strike Longshot is THE Nerf blaster

If you can call a Nerf N-Strike Longshot your own than you possess a piece of Nerf history. The very first blaster to hold the designation “CS-6” – “Clip System 6”. There have been quite a few magazine blasters since then but Nerf modders everywhere love the Longshot the most. Not because it features awesome stock ranges – those are actually quite mediocre. What is great is the Longshot’s potential. Throw a Modification Spring in there and you will be hard pressed to find a blaster that can hold its own against the Longshot.

Features of the Modification Spring for the Nerf Longshot

  • Equivalent mass of spring: 9kg
  • Firing range increase: about 150%
  • Muzzle velocity increase: about 100%
  • difficulty level of spring installation: moderate

Enormous ranges for little effort

The spring-replacement itself is rather easy – the blaster’s internals are a bit complex, though. Take an internal picture or two so you will know where everything goes.

Once the blaster is open you will have to remove the large orange tube. This is the “plunger tube”. On its backside you will find two silver screws – remove these as well to find the stock spring inside. There is one more screw to go on the front of the plunger. Now you just need to replace the original spring with the Blasterparts Modification spring, close everything back up and you are done!



Kurzanleitung zum Einbau der Tuning-Feder


Note: Blasterparts modification products are no toys. Not suitable for children! The installation of the mod kit causes a significant increase in performance. When playing with other people appropriate eye-protection-goggles should be worn as a precaution. Do not aim at face or eyes of other people.

Additional Info

Additional Info

SKU LS-9.0-v2
EAN 609132783302
Manufacturer Blasterparts
Brand Blasterparts
Product Type Spring
Delivery Contents Installation Manual, Modification-Spring
Info

Equivalent Mass: ~ 9 kg

Range: 20 - 25 m

Product Weight [g] 50
Minimum age [in years] 15

Reviews

Customer Reviews (4)
Ist eine starke feder und lohnt sich
Performance
Workmanship
Design
Overall
Ich kann sie für das geld nur empfehelen und ich fand das es einfach zum einbauen ist Review by Ballerman meister (Posted on 12/1/2015)
top Produkt
Performance
Workmanship
Design
Overall
Die Ware wurde super schnell Versand und entsprach voll und ganz der Beschreibung.
Ein empfehlenswertes tuning- Teil, Mündungsenergie und dementsprechend Reichweite hat sich gut verdoppelt. Kinderspielzeug ist nun auch für "größere Kinder" zu gebrauchen :)
Review by strassi (Posted on 11/17/2015)
top wie immer!
Performance
Workmanship
Design
Overall
Die Feder steigert die Leistung wirklich enorm, wobei ich sagen muss das ich sie in eine Zombie Strike
Longshot CS 12 eingebaut habe. Was hier vielleicht in der Produktbeschreibung mal erwähnt werden sollte,vielleicht suchen ja mehrere Leute eine Feder für die CS 12.
Finde sie bringt gefühlte doppelte Leistung und das spannen geht nur unwesentlich schwerer. Bin voll zufrieden!
Review by Guido (Posted on 8/26/2015)
Super!
Performance
Workmanship
Design
Overall
Dank Videoanleitung erwies sich der recht komplexe Einbau als recht unkompliziert. Im Test wurden die Reichweitenwerte bestätigt. Lieferzeit war recht schnell. Sehr zufrieden! Review by Manuel (Posted on 3/30/2014)
Write Your Own Review
You're reviewing: Modification spring for NERF Longshot CS-6
How do you rate this product? *
  1 star 2 stars 3 stars 4 stars 5 stars
Performance
Workmanship
Design
Overall

Comments